Thema: NAS-Distributionen div.

[SiLæncer]

NAS4Free wird von den ursprünglichen Entwicklern von FreeNAS betrieben und sprechen als Zielgruppe wieder den Heimanwender an. Mindestvoraussetzung sind 512MB freier Speicher (möchte man ZFS nutzen, werden 4GB empfohlen). Nach der Installation erfolgt die Einrichtung über eine grafische Bedienoberfläche mittels Webbrowser.

Changelog

- Upgrade to FreeBSD 10.3-RELEASE-P5.
- Add search function to Diagnostics|Log.
- Add bulk delete action to snapshots and other pages.
- Add configuration option for second UPS system.
- Add configuration option for tls_certcheck.
- Add mounting (read-only) support for EXT4 drives.
- UPS monitoring username & password can be set/changed.
- Update installer now full gpt supported.
- Refactoring Webgui parts and replace deprecated php code.
- sshd Challenge-Response Authentication is now configurable.
- Upgrade exfat to 1.2.3.
- Upgrade phpvirtualbox to 5.0-5.
- Upgrade tmux to 2.2.
- Upgrade fusefs-ntfs to 2016.2.22.
- Upgrade inadyn-mt to 02.28.06.
- Upgrade smartmontools to 6.5.
- Upgrade msmtp to 1.6.5.
- Upgrade iperf3 to 3.1.3.
- Upgrade bash 4.3 to p46.
- Upgrade gzip to 1.8.
- Upgrade jquery to 3.0.0.
- Upgrade unison to 2.48.4.
- Upgrade sudo to 1.8.17p1.
- Upgrade mDNSResponder to 625.41.2.
- Upgrade dialog to 1.3-20160424.
- Upgrade virtualbox-ose to 5.0.24.
- Upgrade nano to 2.6.1.
- Upgrade noVNC to 0.6.1.
- Upgrade zoneinfo to 2016f.
- Upgrade samba to 4.3.11.
- Upgrade jQuery to 3.1.0.
- Upgrade e2fsprogs to 1.43.1.
- Upgrade syncthing to 0.14.0.
- Upgrade php to 7.0.9.
- Upgrade netatalk to 3.1.9.
- Upgrade virtualbox-ose to 5.0.26.

[close]

http://www.nas4free.org/

[SiLæncer]

Changelog

BUILD 10.3.0.3.2942
===================
Changes:
- Upgrade to FreeBSD 10.3-RELEASE-P7.
- Add search function to Diagnostics|Log.
- Add bulk delete action to snapshots and other pages.
- Add configuration option for second UPS system.
- Add configuration option for tls_certcheck.
- Add mounting (read-only) support for EXT4 drives.
- UPS monitoring username & password can be set/changed.
- Update installer now full gpt supported.
- Refactoring Webgui parts and replace deprecated php code.
- sshd Challenge-Response Authentication is now configurable.
- Rewrite of zpool tools.
- Upgrade exfat to 1.2.3.
- Upgrade phpvirtualbox to 5.0-5.
- Upgrade tmux to 2.2.
- Upgrade fusefs-ntfs to 2016.2.22.
- Upgrade inadyn-mt to 02.28.06.
- Upgrade smartmontools to 6.5.
- Upgrade msmtp to 1.6.5.
- Upgrade iperf3 to 3.1.3.
- Upgrade bash 4.3 to p46.
- Upgrade gzip to 1.8.
- Upgrade unison to 2.48.4.
- Upgrade sudo to 1.8.17p1.
- Upgrade mDNSResponder to 625.41.2.
- Upgrade dialog to 1.3-20160424.
- Upgrade virtualbox-ose to 5.0.24.
- Upgrade nano to 2.6.1.
- Upgrade noVNC to 0.6.1.
- Upgrade zoneinfo to 2016f.
- Upgrade samba to 4.3.11.
- Upgrade jQuery to 3.1.0.
- Upgrade e2fsprogs to 1.43.1.
- Upgrade netatalk to 3.1.9.
- Upgrade virtualbox-ose to 5.0.26.
- Upgrade lighttpd to 1.4.41.
- Upgrade arcconf to 1_8_21375.
- Upgrade php to 7.0.10.
- Upgrade syncthing to 0.14.5.
- Upgrade libvncserver to 0.9.10.

Fixes:
- Fix prevent deletion of mounted gconcat softraid.
- Fix broken shadow copy.
- Fix for rsync over ssh (without deamon).
- Fix dataset did not always get destroyed on webgui if a share is in usage.
- Fix missing mimes (translation files) for File Manager (translating needed).
- Fix firewall rules cannot be moved into the preset rule area.
- Fix disable fw button not working under certain conditions.
- Fix importing ZFS datasets and ZFS volumes from different ZFS pools.
- Fix code format for Swedish file manager.
- Fix gettext protection against html code injections.
- Fix issue when reformatting disks.
- Fix a problem with gpt/labels.
- Fix Some HGST drive temperatures are not displayed.
- Fix download log files did not always work with some browsers.
- Fix some code errors on System|Advanced|Swap.
- Fix broken log files downloads.
- Fix test emails could not send as in French WebGUI.
- Fix change permission of a dataset fails if related pool doesn't use the default mount point.
- Fix timezone in file manager.

Note for new users:
===================
 
 **** The default login for NAS4Free WEBGUI ****

 username: admin
 password: nas4free


 **** phpVitualBox's default login ****

 username: admin
 password: admin


- Change those default passwords after setup!

[close]

http://www.nas4free.org/

[SiLæncer]

Changelog

BUILD 10.3.0.3.2964
===================
Changes:
- Upgrade to FreeBSD 10.3-RELEASE-P7.
- Add search function to Diagnostics|Log.
- Add bulk delete action to snapshots and other pages.
- Add configuration option for second UPS system.
- Add configuration option for tls_certcheck.
- Add zfs snapshot rollback.
- Add zpool import using gpt labels / gpt id.
- Add mounting (read-only) support for EXT4 drives.
- UPS monitoring username & password can be set/changed.
- Update installer now full gpt supported.
- Refactoring Webgui parts and replace deprecated php code.
- sshd Challenge-Response Authentication is now configurable.
- Rewrite of zpool tools.
- Upgrade exfat to 1.2.3.
- Upgrade phpvirtualbox to 5.0-5.
- Upgrade tmux to 2.2.
- Upgrade fusefs-ntfs to 2016.2.22.
- Upgrade smartmontools to 6.5.
- Upgrade msmtp to 1.6.5.
- Upgrade iperf3 to 3.1.3.
- Upgrade bash 4.3 to p46.
- Upgrade gzip to 1.8.
- Upgrade unison to 2.48.4.
- Upgrade mDNSResponder to 625.41.2.
- Upgrade dialog to 1.3-20160424.
- Upgrade noVNC to 0.6.1.
- Upgrade zoneinfo to 2016f.
- Upgrade samba to 4.3.11.
- Upgrade jQuery to 3.1.0.
- Upgrade lighttpd to 1.4.41.
- Upgrade arcconf to 1_8_21375.
- Upgrade libvncserver to 0.9.10.
- Upgrade inadyn-mt to 02.28.07.
- Upgrade nano to 2.7.0.
- Upgrade e2fsprogs to 1.43.3.
- Upgrade virtualbox-ose to 5.1.6.
- Upgrade netatalk to 3.1.10.
- Upgrade php to 7.0.11.
- Upgrade sudo to 1.8.18.
- Upgrade syncthing to 0.14.7.

Fixes:
- Fix prevent deletion of mounted gconcat softraid.
- Fix broken shadow copy.
- Fix for rsync over ssh (without deamon).
- Fix dataset did not always get destroyed on webgui if a share is in usage.
- Fix missing mimes (translation files) for File Manager (translating needed).
- Fix firewall rules cannot be moved into the preset rule area.
- Fix disable fw button not working under certain conditions.
- Fix importing ZFS datasets and ZFS volumes from different ZFS pools.
- Fix code format for Swedish file manager.
- Fix gettext protection against html code injections.
- Fix issue when reformatting disks.
- Fix a problem with gpt/labels.
- Fix Some HGST drive temperatures are not displayed.
- Fix download log files did not always work with some browsers.
- Fix some code errors on System|Advanced|Swap.
- Fix broken log files downloads.
- Fix test emails could not send as in French WebGUI.
- Fix change permission of a dataset fails if related pool doesn't use the default mount point.
- Fix timezone in file manager.

Note for new users:
===================
 
 **** The default login for NAS4Free WEBGUI ****

 username: admin
 password: nas4free


 **** phpVitualBox's default login ****

 username: admin
 password: admin


- Change those default passwords after setup!

[close]

http://www.nas4free.org/

[SiLæncer]

Changelog

BUILD 10.3.0.3.2987
===================
Changes:
- Upgrade to FreeBSD 10.3-RELEASE-P9.
- Add search function to Diagnostics|Log.
- Add bulk delete action to snapshots and other pages.
- Add configuration option for second UPS system.
- Add configuration option for tls_certcheck.
- Add zfs snapshot rollback.
- Add zpool import using gpt labels / gpt id.
- Increase allowed length of zfs dataset name and zfs volume name to 60 characters.
- Add mounting (read-only) support for EXT4 drives.
- UPS monitoring username & password can be set/changed.
- Update installer now full gpt supported.
- Refactoring Webgui parts and replace deprecated php code.
- sshd Challenge-Response Authentication is now configurable.
- Rewrite of zpool tools.
- Upgrade exfat to 1.2.3.
- Upgrade phpvirtualbox to 5.0-5.
- Upgrade tmux to 2.2.
- Upgrade fusefs-ntfs to 2016.2.22.
- Upgrade smartmontools to 6.5.
- Upgrade msmtp to 1.6.5.
- Upgrade iperf3 to 3.1.3.
- Upgrade gzip to 1.8.
- Upgrade unison to 2.48.4.
- Upgrade mDNSResponder to 625.41.2.
- Upgrade noVNC to 0.6.1.
- Upgrade samba to 4.3.11.
- Upgrade lighttpd to 1.4.41.
- Upgrade arcconf to 1_8_21375.
- Upgrade libvncserver to 0.9.10.
- Upgrade nano to 2.7.0.
- Upgrade e2fsprogs to 1.43.3.
- Upgrade virtualbox-ose to 5.1.6.
- Upgrade netatalk to 3.1.10.
- Upgrade php to 7.0.11.
- Upgrade sudo to 1.8.18.
- Upgrade dialog to 1.3-20160828.
- Upgrade jQuery to 3.1.1.
- Upgrade inadyn-mt to 02.28.08.
- Upgrade zoneinfo to 2016g.
- Upgrade syncthing to 0.14.8.
- Upgrade bash to 4.4.

Fixes:
- Fix prevent deletion of mounted gconcat softraid.
- Fix broken shadow copy.
- Fix for rsync over ssh (without deamon).
- Fix dataset did not always get destroyed on webgui if a share is in usage.
- Fix missing mimes (translation files) for File Manager (translating needed).
- Fix firewall rules cannot be moved into the preset rule area.
- Fix disable fw button not working under certain conditions.
- Fix importing ZFS datasets and ZFS volumes from different ZFS pools.
- Fix code format for Swedish file manager.
- Fix gettext protection against html code injections.
- Fix issue when reformatting disks.
- Fix a problem with gpt/labels.
- Fix Some HGST drive temperatures are not displayed.
- Fix download log files did not always work with some browsers.
- Fix some code errors on System|Advanced|Swap.
- Fix broken log files downloads.
- Fix test emails could not send as in French WebGUI.
- Fix change permission of a dataset fails if related pool doesn't use the default mount point.
- Fix timezone in file manager.
- Fix websockets-connection drop on mouse events in novnc.

[close]

http://www.nas4free.org/

[SiLæncer]

Changelog

BUILD 10.3.0.3.3065
===================
Changes:
- Upgrade to FreeBSD 10.3-RELEASE-P11.
- Add search function to Diagnostics|Log.
- Add bulk delete action to snapshots and other pages.
- Add configuration option for second UPS system.
- Add configuration option for tls_certcheck.
- Add zfs snapshot rollback.
- Add zpool import using gpt labels / gpt id.
- Add Zend OPcache module.
- Add APCu module.
- Change service Webserver to use FastCGI.
- Increase allowed length of zfs dataset name and zfs volume name to 60 characters.
- Add mounting (read-only) support for EXT4 drives.
- UPS monitoring username & password can be set/changed.
- Update installer now full gpt supported.
- Refactoring Webgui parts and replace deprecated php code.
- sshd Challenge-Response Authentication is now configurable.
- Rewrite of zpool tools.
- Upgrade exfat to 1.2.3.
- Upgrade phpvirtualbox to 5.0-5.
- Upgrade fusefs-ntfs to 2016.2.22.
- Upgrade smartmontools to 6.5.
- Upgrade msmtp to 1.6.5.
- Upgrade iperf3 to 3.1.3.
- Upgrade gzip to 1.8.
- Upgrade unison to 2.48.4.
- Upgrade mDNSResponder to 625.41.2.
- Upgrade noVNC to 0.6.1.
- Upgrade samba to 4.3.11.
- Upgrade lighttpd to 1.4.41.
- Upgrade arcconf to 1_8_21375.
- Upgrade libvncserver to 0.9.10.
- Upgrade nano to 2.7.0.
- Upgrade e2fsprogs to 1.43.3.
- Upgrade netatalk to 3.1.10.
- Upgrade sudo to 1.8.18.
- Upgrade dialog to 1.3-20160828.
- Upgrade jQuery to 3.1.1.
- Upgrade syncthing to 0.14.8.
- Upgrade bash to 4.4.
- Upgrade inadyn-mt to 02.28.10.
- Upgrade php to 7.0.12.
- Upgrade syncthing to 0.14.9.
- Upgrade tmux to 2.3.
- Upgrade zoneinfo to 2016h.
- Upgrade virtualbox-ose to 5.1.8.
- Upgrade sudo to 1.8.18P1.
- Upgrade nano to 2.7.1.

Fixes:
- Fix prevent deletion of mounted gconcat softraid.
- Fix broken shadow copy.
- Fix for rsync over ssh (without deamon).
- Fix dataset did not always get destroyed on webgui if a share is in usage.
- Fix missing mimes (translation files) for File Manager (translating needed).
- Fix firewall rules cannot be moved into the preset rule area.
- Fix disable fw button not working under certain conditions.
- Fix importing ZFS datasets and ZFS volumes from different ZFS pools.
- Fix code format for Swedish file manager.
- Fix gettext protection against html code injections.
- Fix issue when reformatting disks.
- Fix a problem with gpt/labels.
- Fix Some HGST drive temperatures are not displayed.
- Fix download log files did not always work with some browsers.
- Fix some code errors on System|Advanced|Swap.
- Fix broken log files downloads.
- Fix test emails could not send as in French WebGUI.
- Fix change permission of a dataset fails if related pool doesn't use the default mount point.
- Fix timezone in file manager.
- Fix websockets-connection drop on mouse events in novnc.
- Fix reverted libvncserver for proper shutdown vms.

Note for new users:
===================
 
 **** The default login for NAS4Free WEBGUI ****

 username: admin
 password: nas4free


 **** phpVitualBox's default login ****

 username: admin
 password: admin


- Change those default passwords after setup!

[close]

http://www.nas4free.org/

[SiLæncer]

Changelog

BUILD 11.0.0.4.3252
===================
Changes:
- Upgrade to FreeBSD 11.0-RELEASE-P3.
- Update config to 2.8.
- Changes XMD driver has been removed.
- Add system RRDGraphs monitoring.
- Add SMB protocols and configuration options.
- Add integrity checks firmware upgrade.
- Add Zend OPcache module.
- Add APCu module.
- Deleted unmaintained translations.
- Update translations.
- Improved System|Advanced|Command Scripts page.
- Improved Diagnostics|Information|Space Used page.
- Improved Diagnostics|Information|Mounts page.
- Improved Diagnostics|Information|Swap page.
- Improved Disks|ZFS|Pools|Information page.
- Improved Disks|ZFS|Pools|I/O Statistics page.
- Improved conversion to xml.
- Change service Webserver to use FastCGI.
- Upgrade inadyn-mt to 02.28.10.
- Upgrade tmux to 2.3.
- Upgrade zoneinfo to 2016h.
- Upgrade virtualbox-ose to 5.1.8.
- Upgrade sudo to 1.8.18p1.
- Upgrade nano to 2.7.1.
- Upgrade iperf3 to 3.1.4.
- Upgrade lighttpd to 1.4.43.
- Upgrade tzdata to 2016i.
- Upgrade samba to 4.3.12.
- Upgrade php to 7.0.13.
- Upgrade syncthing to 0.14.11.
- Upgrade msmtp to 1.6.6.

Fixes:
- Fix escaped characters in output.
- Fix support added for pools with more than 10 vdevices.
- Fix support added for vdevices with more than 10 devices.
- Fix exception handling improved.
- Fix config for DNS server configuration.
- Fix sending reports.

[close]

http://www.nas4free.org/

[SiLæncer]

Changelog

- Update translations.
- Upgrade bash to 4.4 patch 5.
- Upgrade mDNSResponder to 765.1.2.
- Upgrade arcconf to v2_02_22404.
- Upgrade virtualbox-ose to 5.1.10.
- Upgrade tzdata to 2016j.
- Upgrade syncthing to 0.14.13.
- Add Afrikaans translation.
- Allow up to 256 characters for commands.
- Improved performance of zfs tools.
- Improvement of rrdgraphs.
- Fix Webgui initialize variable before call by reference.
- Fix proper start nfsd.
- Fix identify boot/configuration device.
- Fix create htpasswd file only when web service is enabled.
- Fix system screensaver.

[close]

http://www.nas4free.org/

[SiLæncer]

Changelog

- Upgrade to FreeBSD 11.0-RELEASE-P5.
- Upgrade php to 7.0.14.
- Update translations.
- Improved index.php.
- Redesign file manager.
- Fix webgui typo.
- Fix lagg driver upperlayer and other ifnet implementation, add patch.
- Fix allow large file downloads in file manager.

[close]

http://www.nas4free.org/

[SiLæncer]

Changelog

BUILD 11.0.0.4.3460
===================
Changes:
- Upgrade to FreeBSD 11.0-RELEASE-P7.
- Change XMD driver has been replaced for MD.
- Add system RRDGraphs monitoring.
- Webgui design improvements.
- Command Scripts sort capability added.
- Improved conversion to xml.
- Improved performance of zfs tools.
- Improved firmware update procedure.
- Improved index.php.
- More SMB protocols and configuration options added.
- Upgrade msmtp to 1.6.6.
- Upgrade bash to 4.4 patch 5.
- Upgrade arcconf to v2_02_22404.
- Upgrade tzdata to 2016j.
- Upgrade php to 7.0.14.
- Upgrade virtualbox-ose to 5.1.12.
- Upgrade samba to 4.3.13.
- Upgrade nano to 2.7.4.
- Upgrade syncthing to 0.14.19.
- Upgrade iperf3 to 3.1.5.
- Upgrade noVNC to 0.6.2.
- Upgrade mDNSResponder to 765.30.11.
- Upgrade libvncserver to 0.9.11.
- Upgrade lighttpd to 1.4.45.
- Upgrade sudo to 1.8.19p2.
- Upgrade php to 7.0.15.

Fixes:
- Fix escaped characters in output.
- Fix support added for pools with more than 10 vdevices.
- Fix support added for vdevices with more than 10 devices.
- Fix exception handling improved.
- Fix config for DNS server configuration.
- Fix sending reports.
- Fix proper start nfsd.
- Fix identify boot/configuration device.
- Fix create htpasswd file only when web service is enabled.
- Fix system screensaver.
- Fix large file downloads in file manager.

Known bugs:
===========
- IE11 and Edge browser does not operate correctly with novnc. Enter & Escape button problematic,
  this will be fixed at a later release, use Chrome or other browser or connect with putty client.

Default Login:
==============

 **** The default login for NAS4Free WEBGUI ****

 username: admin
 password: nas4free

 **** phpVitualBox's default login ****

 username: admin
 password: admin

- Change default passwords after setup!!!

[close]

http://www.nas4free.org/

[SiLæncer]

Changelog

BUILD 11.0.0.4.3800-BETA
========================
Changes:
- Upgrade to FreeBSD 11.0-RELEASE-P7.
- Change XMD driver has been replaced for MD.
- Add system RRDGraphs monitoring.
- Add zfs on root install.
- Webgui design improvements.
- Command Scripts sort capability added.
- Improved conversion to xml.
- Improved performance of zfs tools.
- Improved firmware update procedure.
- Improved index.php.
- More SMB protocols and configuration options added.
- Upgrade msmtp to 1.6.6.
- Upgrade arcconf to v2_02_22404.
- Upgrade tzdata to 2016j.
- Upgrade php to 7.0.14.
- Upgrade samba to 4.3.13.
- Upgrade nano to 2.7.4.
- Upgrade noVNC to 0.6.2.
- Upgrade mDNSResponder to 765.30.11.
- Upgrade libvncserver to 0.9.11.
- Upgrade lighttpd to 1.4.45.
- Upgrade sudo to 1.8.19p2.
- Upgrade proftpd to 1.3.5d.
- Upgrade virtualbox-ose to 5.1.14.
- Upgrade ipmitool to 1.8.18.
- Upgrade bash to 4.4 patch 11.
- Upgrade syncthing to 0.14.21.
- Upgrade iperf3 to 3.1.6.
- Upgrade dialog to 1.3-20170131.
- Upgrade php to 7.1.1.

Fixes:
- Fix escaped characters in output.
- Fix support added for pools with more than 10 vdevices.
- Fix support added for vdevices with more than 10 devices.
- Fix exception handling improved.
- Fix config for DNS server configuration.
- Fix sending reports.
- Fix proper start nfsd.
- Fix identify boot/configuration device.
- Fix create htpasswd file only when web service is enabled.
- Fix system screensaver.
- Fix large file downloads in file manager.

Known bugs:
===========
- IE11 and Edge browser does not operate correctly with novnc. Enter & Escape button problematic,
  this will be fixed at a later release, use Chrome or other browser or connect with putty client.

Default Login:
==============

 **** The default login for NAS4Free WEBGUI ****

 username: admin
 password: nas4free

 **** phpVitualBox's default login ****

 username: admin
 password: admin

[close]

http://www.nas4free.org/

[SiLæncer]

Changelog

Changes after release 11.0.0.4.3882
===================================
- Update translations.
- Add framework and code optimizations.
- Add preallocation setting to bittorent.
- Encrypt upsmon password.
- Upgrade php to 7.1.2.
- Update config to 3.1.
- Fix bug rsync local entries.
- Fix bug in firmware process.
- Fix bug selected users are not deleted.
- Fix bug user defined groups must not be protected.
- Fix bug upscmd doesn't accept original password.



Known bugs:
===========
- IE11 and Edge browser does not operate correctly with novnc. Enter & Escape button problematic,
  this will be fixed at a later release, use Chrome or other browser or connect with putty client.

[close]

http://www.nas4free.org/

[SiLæncer]

Changelog

BUILD 11.0.0.4.3958
===================
Changes:
- Upgrade to FreeBSD 11.0-RELEASE-P8.
- Change XMD driver has been replaced for MD.
- Add system RRDGraphs monitoring.
- Add zfs on root install.
- Webgui design improvements.
- Command Scripts sort capability added.
- Improved conversion to xml.
- Improved performance of zfs tools.
- Improved firmware update procedure.
- Improved index.php.
- More SMB protocols and configuration options added.
- Upgrade msmtp to 1.6.6.
- Upgrade arcconf to v2_02_22404.
- Upgrade tzdata to 2016j.
- Upgrade php to 7.0.14.
- Upgrade samba to 4.3.13.
- Upgrade noVNC to 0.6.2.
- Upgrade mDNSResponder to 765.30.11.
- Upgrade libvncserver to 0.9.11.
- Upgrade lighttpd to 1.4.45.
- Upgrade sudo to 1.8.19p2.
- Upgrade proftpd to 1.3.5d.
- Upgrade virtualbox-ose to 5.1.14.
- Upgrade ipmitool to 1.8.18.
- Upgrade bash to 4.4 patch 12.
- Upgrade iperf3 to 3.1.6.
- Upgrade dialog to 1.3-20170131.
- Upgrade syncthing to 0.14.23.
- Upgrade e2fsprogs to 1.43.4.
- Upgrade php to 7.1.2.
- Upgrade nano to 2.7.5.

Fixes:
- Fix escaped characters in output.
- Fix support added for pools with more than 10 vdevices.
- Fix support added for vdevices with more than 10 devices.
- Fix exception handling improved.
- Fix config for DNS server configuration.
- Fix sending reports.
- Fix proper start nfsd.
- Fix identify boot/configuration device.
- Fix create htpasswd file only when web service is enabled.
- Fix system screensaver.
- Fix large file downloads in file manager.
- Fix install failure for embedded.
- Fix bug import encrypted disks.
- Fix bug rsync local entries.
- Fix bug zfs on root installer.

Known bugs:
===========
- IE11 and Edge browser does not operate correctly with novnc. Enter & Escape button problematic,
  this will be fixed at a later release, use Chrome or other browser or connect with putty client.

Default Login:
==============

 **** The default login for NAS4Free WEBGUI ****

 username: admin
 password: nas4free

 **** phpVitualBox's default login ****

 username: admin
 password: admin

- Change default passwords after setup!!!

[close]

http://www.nas4free.org/

[SiLæncer]

Changelog

BUILD 11.0.0.4.4009
===================
Changes:
- Upgrade to FreeBSD 11.0-RELEASE-P8.
- Change XMD driver has been replaced for MD.
- Add system RRDGraphs monitoring.
- Add zfs on root install.
- Webgui design improvements.
- Command Scripts sort capability added.
- Improved conversion to xml.
- Improved performance of zfs tools.
- Improved firmware update procedure.
- Improved index.php.
- More SMB protocols and configuration options added.
- Upgrade msmtp to 1.6.6.
- Upgrade arcconf to v2_02_22404.
- Upgrade php to 7.0.14.
- Upgrade samba to 4.3.13.
- Upgrade noVNC to 0.6.2.
- Upgrade mDNSResponder to 765.30.11.
- Upgrade libvncserver to 0.9.11.
- Upgrade lighttpd to 1.4.45.
- Upgrade sudo to 1.8.19p2.
- Upgrade proftpd to 1.3.5d.
- Upgrade virtualbox-ose to 5.1.14.
- Upgrade ipmitool to 1.8.18.
- Upgrade bash to 4.4 patch 12.
- Upgrade dialog to 1.3-20170131.
- Upgrade e2fsprogs to 1.43.4.
- Upgrade php to 7.1.2.
- Upgrade nano to 2.7.5.
- Upgrade tzdata to 2017a.
- Upgrade iperf to 3.1.7.
- Upgrade syncthing to 0.14.24.

Fixes:
- Fix escaped characters in output.
- Fix support added for pools with more than 10 vdevices.
- Fix support added for vdevices with more than 10 devices.
- Fix exception handling improved.
- Fix config for DNS server configuration.
- Fix sending reports.
- Fix proper start nfsd.
- Fix identify boot/configuration device.
- Fix create htpasswd file only when web service is enabled.
- Fix system screensaver.
- Fix large file downloads in file manager.
- Fix install failure for embedded.
- Fix bug import encrypted disks.
- Fix bug rsync local entries.

Known bugs:
===========
- IE11 and Edge browser does not operate correctly with novnc. Enter & Escape button problematic,
  this will be fixed at a later release, use Chrome or other browser or connect with putty client.

Default Login:
==============

 **** The default login for NAS4Free WEBGUI ****

 username: admin
 password: nas4free

 **** phpVitualBox's default login ****

 username: admin
 password: admin

- Change default passwords after setup!!!

[close]

http://www.nas4free.org/

[SiLæncer]

Changelog

BUILD 11.0.0.4.4029
===================
Changes:
- Upgrade to FreeBSD 11.0-RELEASE-P8.
- Change XMD driver has been replaced for MD.
- Add system RRDGraphs monitoring.
- Add zfs on root install.
- Webgui design improvements.
- Command Scripts sort capability added.
- Improved conversion to xml.
- Improved performance of zfs tools.
- Improved firmware update procedure.
- Improved index.php.
- More SMB protocols and configuration options added.
- Upgrade msmtp to 1.6.6.
- Upgrade arcconf to v2_02_22404.
- Upgrade php to 7.0.14.
- Upgrade noVNC to 0.6.2.
- Upgrade mDNSResponder to 765.30.11.
- Upgrade libvncserver to 0.9.11.
- Upgrade lighttpd to 1.4.45.
- Upgrade sudo to 1.8.19p2.
- Upgrade proftpd to 1.3.5d.
- Upgrade virtualbox-ose to 5.1.14.
- Upgrade ipmitool to 1.8.18.
- Upgrade bash to 4.4 patch 12.
- Upgrade dialog to 1.3-20170131.
- Upgrade e2fsprogs to 1.43.4.
- Upgrade php to 7.1.2.
- Upgrade nano to 2.7.5.
- Upgrade tzdata to 2017a.
- Upgrade iperf to 3.1.7.
- Upgrade syncthing to 0.14.24.
- Upgrade virtualbox-ose to 5.1.16.
- upgrade samba to 4.4.10.

Fixes:
- Fix escaped characters in output.
- Fix support added for pools with more than 10 vdevices.
- Fix support added for vdevices with more than 10 devices.
- Fix exception handling improved.
- Fix config for DNS server configuration.
- Fix sending reports.
- Fix proper start nfsd.
- Fix identify boot/configuration device.
- Fix create htpasswd file only when web service is enabled.
- Fix system screensaver.
- Fix large file downloads in file manager.
- Fix install failure for embedded.
- Fix bug import encrypted disks.
- Fix bug rsync local entries.
- Fix suppress message being displayed twice.

Known bugs:
===========
- IE11 and Edge browser does not operate correctly with novnc. Enter & Escape button problematic,
  this will be fixed at a later release, use Chrome or other browser or connect with putty client.

[close]

http://www.nas4free.org/

[SiLæncer]

Changelog

BUILD 11.0.0.4.4040
===================
Changes:
- Upgrade to FreeBSD 11.0-RELEASE-P8.
- Change XMD driver has been replaced for MD.
- Add system RRDGraphs monitoring.
- Add zfs on root install.
- Webgui design improvements.
- Command Scripts sort capability added.
- Improved conversion to xml.
- Improved performance of zfs tools.
- Improved firmware update procedure.
- Improved index.php.
- More SMB protocols and configuration options added.
- Upgrade msmtp to 1.6.6.
- Upgrade arcconf to v2_02_22404.
- Upgrade php to 7.0.14.
- Upgrade noVNC to 0.6.2.
- Upgrade mDNSResponder to 765.30.11.
- Upgrade libvncserver to 0.9.11.
- Upgrade lighttpd to 1.4.45.
- Upgrade sudo to 1.8.19p2.
- Upgrade proftpd to 1.3.5d.
- Upgrade virtualbox-ose to 5.1.14.
- Upgrade ipmitool to 1.8.18.
- Upgrade bash to 4.4 patch 12.
- Upgrade dialog to 1.3-20170131.
- Upgrade e2fsprogs to 1.43.4.
- Upgrade php to 7.1.2.
- Upgrade nano to 2.7.5.
- Upgrade tzdata to 2017a.
- Upgrade iperf to 3.1.7.
- Upgrade syncthing to 0.14.24.
- Upgrade virtualbox-ose to 5.1.16.
- upgrade samba to 4.4.10.

Fixes:
- Fix escaped characters in output.
- Fix support added for pools with more than 10 vdevices.
- Fix support added for vdevices with more than 10 devices.
- Fix exception handling improved.
- Fix config for DNS server configuration.
- Fix sending reports.
- Fix proper start nfsd.
- Fix identify boot/configuration device.
- Fix create htpasswd file only when web service is enabled.
- Fix system screensaver.
- Fix large file downloads in file manager.
- Fix install failure for embedded.
- Fix bug import encrypted disks.
- Fix bug rsync local entries.
- Fix suppress message being displayed twice.
- Fix deleting group was calling update processor with wrong notifier id.

Known bugs:
===========
- IE11 and Edge browser does not operate correctly with novnc. Enter & Escape button problematic,
  this will be fixed at a later release, use Chrome or other browser or connect with putty client.

Default Login:
==============

 **** The default login for NAS4Free WEBGUI ****

 username: admin
 password: nas4free

 **** phpVitualBox's default login ****

 username: admin
 password: admin

- Change default passwords after setup!!!

[close]

http://www.nas4free.org/