Autor Thema: VirtualBox ...  (Gelesen 35558 mal)

0 Mitglieder und 1 Gast betrachten dieses Thema.

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
VirtualBox 4.2.8
« Antwort #90 am: 28 Februar, 2013, 06:30 »
Changelog:

Version 4.2.8
This is a maintenance release. The following items were fixed and/or added:
 VMM: fixed guest crash with huge amount of guest RAM on VT-x hosts (bug #11306)
 GUI: fixed a layout bug in the Mac OS X clone VM dialog (bug #10982)
 GUI: not all the translation tags were taken into account during the language switch (bug
#11342)
 GUI: take-guest-screenshot dialog sometimes had no keyboard input available on Windows
host
 Main/Machine: fix generation of spurious event for inaccessible VMs which triggered an
endless event generation loop in cooperation with the GUI which became unresponsive
(4.2.6 regression, bug #11323)
 Main/Display: fix for an access violation under certain conditions in multi-monitor config-urations (bug #10539)
 Main/Metrics: network metrics are now collected for active (up) interfaces only, the state
of an interface being evaluated when the associated metric is enabled via setupMetrics
 Snapshots: reduce the time for merging snapshots under certain conditions
 Storage: fixed data corruption after resizing a VDI image under certain circumstances (bug
#11344)
 Storage: fixed non working online merging of snapshots (4.2.6 regression, bug #11359)
 Storage: fixed crash when connecting to certain QNAP iSCSI targets
 Storage: fixed incompatibility of VHD differencing images with Hyper-V (bug #5990)
 Bridged Networking: fixed TCP pseudo header checksum computation for IPv6 (bug
#9380)
 3D support: fix Battlefield 1942 game crashes (bug #11369)
 Settings: really sanitise the name of VM folders and settings file, the code was disabled
before (bug #10549)
 Settings: allow to change VRDE settings for saved VMs
 VBoxManage: don’t crash during screenshotpng if there is no display (bug #11363)
 Linux hosts: work around gcc bug 55940 which might lead to wrong kernel module code
if gcc 4.7 is used to compile the 32-bit Linux host kernel (bug #11035)
 Linux hosts: fixed inconsistent lock state and deadlock warnings on module load and VM
startup when CONFIG_PROVE_LOCKING is enabled (bug #11318)
 Linux hosts: made “]“ key work again on Japanese keyboards
 Mac OS X hosts: don’t crash the kernel during dtrace if the VBox kernel extensions are
loaded (10.6 hosts only; bug #11273)
 Solaris / Mac OS X hosts: machine CPU load metrics now report 100% when all cores are
fully utilized (used to be a single core)
 Solaris 11 host installer: wait for any services left over from a previous installation to be
terminated to avoid confusing SMF.
 Guest Additions: don’t block signals for processes executed via guest control
 Guest Additions: fixed a small memory leak in VBoxService (bug #10970)
 Windows Additions: fixed shared folder issue with large reads/writes on 64 bit Windows
guests (bug #11115)
 Linux Additions: added auto-logon support for Linux guests using LightDM as the display
manager
 Linux Additions: Linux 3.8 compile fixes (bug #11036)
 X11 Additions: fixed blocked SIGALRM in 3D desktop sessions (bug #10987)
 X11 Additions: fixed an unresolved reference in vboxvideo_drv for X.org 6.8 guests and
before (e.g. RHEL4; 4.2.0 regression)
 X11 Additions: fixed screen automatic resizing for guests with X.org 1.3 or older (4.2.0
regression)
15.2 Version 4

Download: Klick

http://www.virtualbox.org/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
VirtualBox 4.2.10
« Antwort #91 am: 15 März, 2013, 19:01 »
VirtualBox 4.2.10 (release 2013-03-15)

This is a maintenance release. The following items were fixed and/or added:

    GUI: fixed keyboard with XQuartz X server (bug #10664)
    Main/Display: fixed a crash with multi-monitors under certain conditions (Mac OS X hosts only)
    Main/Properties: fixed a crash under certain conditions, for example after wakeup from host hibernate (bug #11444)
    Settings: don't lose the internal network settings if they are not currently active
    Storage: another incompatibility fix for VHD differencing images with Hyper-V (bug #5990)
    VBoxManage: don't read beyond the end of the file specified with export --eulafile (bug #11528)
    Linux hosts / guests: Linux 3.9-rc0 compile fixes (bug #11529)
    Linux Additions: fixed two warnings in the shared folders guest kernel module (bug #11390)
    Linux Additions: don't crash VBoxService if libdbus is not available (bug #8638)
    Windows Additions: fixed upgrading MultiMedia Redirection (MMR) support

http://www.virtualbox.org/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
VirtualBox 4.2.12
« Antwort #92 am: 12 April, 2013, 14:30 »
Version 4.2.12 (2013-04-12)
This is a maintenance release. The following items were fixed and/or added:
 VMM: fixed a Guru Meditation on putting Linux guest CPU online if nested paging is dis-abled
 VMM: invalidate TLB entries even for non-present pages
 GUI: Multi-screen support: fixed a crash on visual-mode change
 GUI: Multi-screen support: disabled guest-screens should now remain disabled on visual-mode change
 GUI: Multi-screen support: handle host/guest screen plugging/unplugging in different
visual-modes
 GUI: Multi-screen support: seamless mode: fixed a bug when empty seamless screens were
represented by fullscreen windows
 GUI: Multi-screen support: each machine window in multi-screen configuration should
have correct menu-bar now (Mac OS X hosts)
 GUI: Multi-screen support: machine window View menu should have correct content in
seamless/fullscreen mode now (Mac OS X hosts)
 GUI: VM manager: vertical scroll-bars should be now updated on content/window resize
 GUI: VM settings: fixed crash on machine state-change event
 GUI: don’t show warnings about enabled or disabled mouse integration if the VM was
restored from a saved state
 Virtio-net: properly announce that the guest has to handle partial TCP checksums (bug
#9380)
 Storage: Fixed incorrect alignment of VDI images causing disk size changes when using
snapshots (bug #11597)
 Audio: fixed broken ALSA & PulseAudio on some Linux hosts due to invalid symbol reso-lution (bug #11615)
 PS/2 keyboard: re-apply keyboard repeat delay and rate after a VM was restored from a
saved state (bug #10933)
 BIOS: updated DMI processor information table (type 4): corrected L1 & L2 cache table
handles
 Timekeeping: fix several issues which can lead to incorrect time, Solaris guests sporadically
showed time going briefly back to Jan 1 1970
 Main/Metrics: disk metrics are collected properly when software RAID, symbolic links or
rootfs are used on Linux hosts
 VBoxManage: don’t stay paused after a snapshot was created and the VM was running
before
 VBoxManage: introduced controlvm nicpromisc (bug #11423)
 VBoxManage: don’t crash on controlvm guestmemoryballoon of the VM isn’t running (bug
#11639)
 VBoxHeadless: don’t filter guest property events as this would affect all clients (bug
#11644)
 Guest control: prevent double CR in the output generated by guest commands and do NLS
conversion
 Linux hosts / guests: fixed build errors on Linux 3.5 and newer kernels if the CON-FIG_UIDGID_STRICT_TYPE_CHECKS config option is enabled (bug #11664)
 Linux Additions: handle fall-back to VESA driver on RedHat-based guests if vboxvideo
cannot be loaded
 Linux Additions: RHEL/OEL/CentOS 6.4 compile fix (bug #11586)
 Linux Additions: Debian Linux kernel 3.2.0-4 (3.2.39) compile fix (bug #11634)
 Linux Additions: added auto-logon support for Linux guests using LightDM as the display
manager
 Windows Additions: Support for multimonitor. Dynamic enable/disable of secondary vir-tual monitors. Support for XPDM/WDDM based guests (bug #6118)
 X11 Additions: support X.Org Server 1.14 (bug #11609)

Download : Klick

http://www.virtualbox.org/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
VirtualBox 4.2.14 erschienen
« Antwort #93 am: 21 Juni, 2013, 19:20 »
Whats new: >>

This is a maintenance release. The following items were fixed and/or added:

    VMM: another TLB invalidation fix for non-present pages
    VMM: fixed a performance regression (4.2.8 regression; bug #11674)
    GUI: fixed a crash on shutdown
    GUI: prevent stuck keys under certain conditions on Windows hosts (bugs #2613, #6171)
    VRDP: fixed a rare crash on the guest screen resize
    VRDP: allow to change VRDP parameters (including enabling/disabling the server) if the VM is paused
    USB: fixed passing through devices on Mac OS X host to a VM with 2 or more virtual CPUs (bug #7462)
    USB: fixed hang during isochronous transfer with certain devices (4.1 regression; Windows hosts only; bug #11839)
    USB: properly handle orphaned URBs (bug #11207)
    BIOS: fixed function for returning the PCI interrupt routing table (fixes NetWare 6.x guests)
    BIOS: don't use the ENTER / LEAVE instructions in the BIOS as these don't work in the real mode as set up by certain guests (e.g. Plan 9 and QNX 4)
    DMI: allow to configure DmiChassisType (bug #11832)
    Storage: fixed lost writes if iSCSI is used with snapshots and asynchronous I/O (bug #11479)
    Storage: fixed accessing certain VHDX images created by Windows 8 (bug #11502)
    Storage: fixed hang when creating a snapshot using Parallels disk images (bug #9617)
    3D: seamless + 3D fixes (bug #11723)
    3D: version 4.2.12 was not able to read saved states of older versions under certain conditions (bug #11718)
    Main/Properties: don't create a guest property for non-running VMs if the property does not exist and is about to be removed (bug #11765)
    Main/Properties: don't forget to make new guest properties persistent after the VM was terminated (bug #11719)
    Main/Display: don't lose seamless regions during screen resize
    Main/OVF: don't crash during import if the client forgot to call Appliance::interpret() (bug #10845)
    Main/OVF: don't create invalid appliances by stripping the file name if the VM name is very long (bug #11814)
    Main/OVF: don't fail if the appliance contains multiple file references (bug #10689)
    Main/Metrics: fixed Solaris file descriptor leak
    Settings: limit depth of snapshot tree to 250 levels, as more will lead to decreased performance and may trigger crashes
    VBoxManage: fixed setting the parent UUID on diff images using sethdparentuuid
    Linux hosts: work around for not crashing as a result of automatic NUMA balancing which was introduced in Linux 3.8 (bug #11610)
    Windows installer: force the installation of the public certificate in background (i.e. completely prevent user interaction) if the --silent command line option is specified
    Windows Additions: fixed problems with partial install in the unattended case
    Windows Additions: fixed display glitch with the Start button in seamless mode for some themes
    Windows Additions: Seamless mode and auto-resize fixes
    Windows Additions: fixed trying to to retrieve new auto-logon credentials if current ones were not processed yet
    Windows Additions installer: added the /with_wddm switch to select the experimental WDDM driver by default
    Linux Additions: fixed setting own timed out and aborted texts in information label of the lightdm greeter
    Linux Additions: fixed compilation against Linux 3.2.0 Ubuntu kernels (4.2.12 regression as a side effect of the Debian kernel build fix; bug #11709)
    X11 Additions: reduced the CPU load of VBoxClient in drag'and'drop mode
    OS/2 Additions: made the mouse wheel work (bug #6793)
    Guest Additions: fixed problems copying and pasting between two guests on an X11 host (bug #11792)

http://www.virtualbox.org/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
VirtualBox 4.2.16
« Antwort #94 am: 04 Juli, 2013, 20:00 »
This is a maintenance release. The following items were fixed and/or added:

 OVF/OVA: don’t crash on import if no manifest is used (4.2.14 regression; bug #11895)
 GUI: do not restore the current snapshot if we power-off after a Guru Mediation
 Storage: fixed a crash when hotplugging an empty DVD drive to the VM
 Storage: fixed a crash when a guest read from a DVD drive attached to the SATA controller
under certain circumstances
 EFI: don’t fail with 64-bit guests on 32-bit hosts (bug #11456)
 Autostart: fixed VM startup on OS X
 Windows hosts: native Windows 8 controls
 Windows hosts: restore native style on Vista 32
 Windows hosts / guests: Windows 8.1 adaptions (bug #11899)
 Mac OS X hosts: after removing VirtualBox with VirtualBox_Uninstall.tool, remove it from
the pkgutil –pkgs list as well

Download : http://download.virtualbox.org/virtualbox/4.2.16/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
VirtualBox 4.3.0 Beta 1
« Antwort #95 am: 21 August, 2013, 12:20 »
# The following major new features were added:
* VMM: major rewrite of the VT-x code including many bug fixes and performance improvements
* GUI: keyboard shortcuts management (input page of global preferences extended with
* possibility to edit general keyboard shortcuts for VirtualBox Manager and Virtual Machine)
* GUI: extended messaging mechanism (new non-modal popup overlays used to show noncritical warnings and provide user with additional information)
* GUI: video capturing support
* GUI: host touch devices support (GUI passes host touch-events to guest)
* Emulated USB touch devices
* VRDP: support for IPv6
* NAT: experimental virtual router mode: several VMs are attached to the same internal network and share one NAT service
# In addition, the following items were fixed and/or added:
* VMM: properly handle NMIs on Linux hosts with X2APIC enabled
* GUI: update check uses https
* GUI: lot of internal stuff rewritten (cleanup and bug-fixes)
* Settings: global and per-VM default frontend configuration, useful to select the use of alternative VM frontends
* Settings: limit depth of snapshot tree to 250 levels, as more will lead to decreased performance and may trigger crashes
* Main: new event queue implementation which does not use the host’s native event queue for processing VirtualBox events anymore
* Main: use the XDG standard configuration folder instead of .VirtualBox on systems where it is appropriate
* VBoxManage: list more information about hard disk/DVD/floppy media, and support the--long option to show really all available details
* VBoxManage: added support for optional command line parameters for the automatic Guest Additions update
* VBoxManage: added support for listing active guest sessions, guest processes and/or guest files via guestcontrol list <all|sessions|processes|files>
* VBoxManage: added support for closing active guest sessions via guestcontrol session close --session-id <ID>| --session-name <name or pattern>|--all
* VBoxManage: added support for terminating active guest processes via guestcontrol process kill|close|terminate --session-id <ID>| --session-name <name or pattern> <PID> ... <PID n> or guestcontrol [p[s]]kill --session-id <ID>| --session-name <name or pattern> <PID> ... <PID n>
* VBoxManage: added support for watching guest sessions via guestcontrol watch
* 3D support: several fixes
* 3D support: several fixes for Mac OS X hosts
* OVF: several fixes
* Keyboard: fix for reporting key sequences like Ctrl+Alt+Del for the USB keyboard emulation
* Shared Clipboard/X11: support for BMP-format images, contributed by François Revol
* Windows hosts: don’t cause massive DPC latency
* Windows hosts: consider symlinks when retrieving volume information
* Windows Additions: fixed misbehavior with guest display power management (WDDM driver only)
* Windows guests: ability to track guest user idle times through the newly introduced event IGuestUserStateChangedEvent

http://www.virtualbox.org/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
VirtualBox 4.2.18-88780
« Antwort #96 am: 06 September, 2013, 19:40 »
Version 4.2.18 (2013-09-06)

This is a maintenance release. The following items were fixed and/or added:
 VMM: properly handle NMIs on Linux hosts with X2APIC enabled
 VMM: fixed potential crashes with 64-bit guests on 32-bit hosts (bug #11979)
 GUI / seamless: properly handle mouse wheel scroll events
 GUI, VBoxManage: when unregistering a VM, also unregister the hard disk images which
are used exclusively (bug #10311)
 GUI: prevent crashes under certain conditions on X11 hosts
 3D: multiscreen fixes (incorrect mouse position, flickets)
 3D Support: several fixes for the Windows WDDM video driver (multiscreen, seamless)
 Snapshots: made live snapshots work again (bug #9255)
 Teleportation: made it work again (bug #9455)
 VBoxManage: on snapshot take, –pause is default and –live is for doing live snapshots
 VBoxSVC: don’t crash on systems with many VLAN interfaces (Solaris hosts only)
 Network: after the host resumes from suspend, disconnect and reconnect the virtual network cables to force renewing the DHCP leases for the guests. So far only Mac OS X hosts
and Windows hosts (bug #10063).
 NAT: on name server changes force a reconnect of the virtual network cable to notify the
guest (Mac OS X hosts only)
 Mac OS X installer: keep previously installed Extension Packs on VirtualBox upgrade
 Linux hosts / guests: Linux 3.11 fixes (bug #12001)
 Solaris hosts: fixed a potential kernel panic caused due to unexpected preemption due to
logging.
 Windows hosts: fixed an issue with USB2 devices being inaccessible when plugged into
USB3 ports.
 Linux Additions: added PCI device identifier to vboxvideo.ko fixing DRI initialization under
certain conditions (bug #11957)
 Linux Additions: fixed udev detection in the init script with Linux 3.x kernels

Download : http://download.virtualbox.org/virtualbox/4.2.18/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
VirtualBox 4.3.0 r88827 Beta 2
« Antwort #97 am: 10 September, 2013, 13:32 »
Whats new: >>

· VMM: fixed several regressions; fixed accessing certain MSRs (Intel and AMD)
· VMM: fixed 64-bit guests on 32-bit hosts including fixes for host crashes under certain conditions.
· VMM: allow to use VT-x in SMX mode
· GUI: more settings validation fixes
· GUI: medium enumeration overhaul to speed up opening the settings dialog
· GUI: fixed crashes under certain conditions on X11 hosts
· Main: extension pack framework can now support loading HGCM modules, contributed by Jeff Westphal
· Settings: the exclusive HW virtualization setting is now global, not per-VM as before
· NAT: fixed port-forwarding
· NAT: binding IPv4 connectivity to specified interface (global extradata "NAT//SourceIp4" ipv4)
· NAT: DHCP reports list of DNS servers (w/o loopback mapping)
· USB: detect USB2 devices on USB3 ports (Windows hosts only)
· OVF: fixed import regression with double OHCI controller
· 3D: fixed 3D-related crashes and Windows 8.1 rendering issues on OSX hosts
· 3D: fixed Ubuntu 13.04 3D desktop rendering issues
· Windows Additions: several autoresize and seamless fixes
· Windows Additions: updated Wine sources
· Windows Additions: fixed NT4 regression

http://www.virtualbox.org/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
VirtualBox 4.3.0 r89194 Beta 3
« Antwort #98 am: 21 September, 2013, 11:30 »
Whats new: >>

· VMM: major rewrite of the VT-x code and the AMD-V code including many bug fixes and performance improvements
· GUI: extended messaging mechanism (new non-modal popup overlays used to show noncritical warnings and provide user with additional information)
· GUI: keyboard shortcuts management (input page of global preferences extended with
· possibility to edit general keyboard shortcuts for VirtualBox Manager and Virtual Machine)
· GUI: video capturing support
· Added USB touch device emulation
· Added SCSI CD-ROM emulation, including boot support
· VRDP: support for IPv6
· Guest Control: guest sessions now are running in dedicated, impersonated session processes needs at least Guest Additions 4.3 installed)
· Guest Control: implemented IGuestFile support
· NAT: experimental virtual router mode: several VMs are attached to the same internal
· network and share one NAT service (see chapter 6.4, Network Address Translation Service experimental), page 95)
In addition, the following items were fixed and/or added:
· VMM: properly handle NMIs on Linux hosts with X2APIC enabled
· VMM: significantly improved performance of NetWare 5.x/6.x guests on host systems without nested paging support
· VMM: fixed losing host NMIs while in VT-x guest-context
· VMM: changed order of actions in emulated task switch
· GUI: update check uses https
· GUI: numerous minor internal cleanups and bug fixes
· GUI, VBoxManage: when unregistering a VM, also unregister the hard disk images which are used exclusively
· Snapshots: made live snapshots work again
· Teleportation: made it work again
· Storage: implemented AHA-154x compatibility mode in the emulated BusLogic SCSI HBA
· Storage: significantly improved performance of large ATAPI PIO transfers (BeOS, Minix 3 guests affected)
· Storage: added floppy formatting emulation (NB: cannot be used to change existing media geometry)
· Settings: global and per-VM default frontend configuration, useful to select the use of
· alternative VM frontends
· Settings: limit depth of snapshot tree to 250 levels, as more will lead to decreased performance and may trigger crashes
· Settings: the per-VM hwvirtextexcl setting has been replaced by a global hwvirtexclusive property
· Main: new event queue implementation which does not use the host’s native event queue for processing VirtualBox events anymore
· Main: eliminate the use of SysV semaphores on all host OSes other than Windows, namely Linux, Solaris and Mac OS X, with the consequence that no system reconfiguration is needed to run more than approximately 100 VMs
· Main: use the XDG standard configuration folder instead of .VirtualBox on systems where it is appropriate
· Main: extension pack framework can now support loading HGCM modules, contributed by Jeff Westphal
· VBoxManage: list more information about hard disk/DVD/floppy media, and support the
· long option to show really all available details
· VBoxManage: added support for optional command line parameters for the automatic
· Guest Additions update
· VBoxManage: added support for listing active guest sessions, guest processes and/or guest files via guestcontrol list
· VBoxManage: added support for closing active guest sessions via guestcontrol session
· close --session-id | --session-name |--all
· VBoxManage: added support for terminating active guest processes via guestcontrol
· process kill|close|terminate --session-id | --session-name ... or guestcontrol [p[s]]kill --session-id | session-name ...
· VBoxManage: added support for watching guest sessions via guestcontrol watch
· 3D support: several fixes
· 3D support: several fixes for Mac OS X hosts
· OVF: several fixes
· Keyboard: fix for reporting key sequences like Ctrl+Alt+Del for the USB keyboard emulation
· Shared Clipboard/X11: support for BMP-format images, contributed by François Revol
· Windows hosts: don’t cause massive DPC latency (only on certain hosts; still needs improving)
· Windows hosts: consider symlinks when retrieving volume information
· Windows hosts: fixed an issue with USB2 devices being inaccessible when plugged into
· USB 3.0 ports
· Windows Additions: fixed misbehavior with guest display power management (WDDM
· driver only)
· Linux Additions: fixed udev detection in the init script with Linux 3.x kernels
· Windows guests: ability to track guest user idle times through the newly introduced event IGuestUserStateChangedEvent

http://www.virtualbox.org/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
VirtualBox 4.3.0 r89687 RC 1
« Antwort #99 am: 08 Oktober, 2013, 20:00 »
Whats new: >>

Version 4.3.0 Release Candidate 1 (2013-10-08)
This is a major update. The following major new features were added:
 VMM: major rewrite of the VT-x code and the AMD-V code including many bug fixes and
performance improvements (for example bug #9659)
 VMM: introduced a lightweight instruction interpreter for situations not handled by hardware virtualization
 GUI: extended messaging mechanism (new non-modal popup overlays used to show noncritical warnings and provide user with additional information)
 GUI: keyboard shortcuts management (input page of global preferences extended with
possibility to edit general keyboard shortcuts for VirtualBox Manager and Virtual Machine)
 GUI: video capturing support (bug #4766)
 Added USB touch device emulation
 Added SCSI CD-ROM emulation, including boot support
 VRDP: support for IPv6
 Guest Control: guest sessions now are running in dedicated, impersonated session processes (needs at least Guest Additions 4.3 installed)
 Guest Control: implemented IGuestFile support
 NAT: experimental virtual router mode: several VMs are attached to the same internal
network and share one NAT service (see chapter 6.4, Network Address Translation Service
(experimental), page 95)
In addition, the following items were fixed and/or added:
 VMM: significantly improved performance of NetWare 5.x/6.x guests on host systems without nested paging support
 VMM: fixed losing host NMIs while in VT-x guest-context
 VMM: changed order of actions in emulated task switch (bug #10532)
 GUI: update check uses https
222
15 Change log
 GUI: numerous minor internal cleanups and bug fixes
 GUI, VBoxManage: when unregistering a VM, also unregister the hard disk images which
are used exclusively (bug #10311)
 GUI: use the number of physical presented processor cores instead of the number of logical
processor cores to check if the users assigned too many virtual CPUs to the guest
 Snapshots: made live snapshots work again (bug #9255)
 Teleportation: made it work again (bug #9455)
 Storage: implemented AHA-154x compatibility mode in the emulated BusLogic SCSI HBA
 Storage: significantly improved performance of large ATAPI PIO transfers (BeOS, Minix 3
guests affected)
 Storage: added floppy formatting emulation (NB: cannot be used to change existing media
geometry)
 Settings: global and per-VM default frontend configuration, useful to select the use of
alternative VM frontends
 Settings: limit depth of snapshot tree to 250 levels, as more will lead to decreased performance and may trigger crashes
 Settings: the per-VM hwvirtextexcl setting has been replaced by a global hwvirtexclusive
property
 Main: new event queue implementation which does not use the host’s native event queue
for processing VirtualBox events anymore
 Main: eliminate the use of SysV semaphores on all host OSes other than Windows, namely
Linux, Solaris and Mac OS X, with the consequence that no system reconfiguration is
needed to run more than approximately 100 VMs
 Main: use the XDG standard configuration folder instead of .VirtualBox on systems where
it is appropriate (bug #5099)
 Main: extension pack framework can now support loading HGCM modules, contributed by
Jeff Westphal
 VBoxManage: list more information about hard disk/DVD/floppy media, and support the
--long option to show really all available details
 VBoxManage: added support for optional command line parameters for the automatic
Guest Additions update
 VBoxManage: added support for listing active guest sessions, guest processes and/or guest
files via guestcontrol list <all|sessions|processes|files>
 VBoxManage: added support for closing active guest sessions via guestcontrol session
close --session-id <ID>| --session-name <name or pattern>|--all
 VBoxManage: added support for terminating active guest processes via guestcontrol
process kill|close|terminate --session-id <ID>| --session-name <name or
pattern> <PID> ... <PID n> or guestcontrol [p[s]]kill --session-id <ID>|
--session-name <name or pattern> <PID> ... <PID n>
 VBoxManage: added support for watching guest sessions via guestcontrol watch
223
15 Change log
 3D support: several fixes
 3D support: several fixes for Mac OS X hosts
 OVF: several fixes
 Extpack Installer: make it work if the file is located in a folder with special characters
 Keyboard: fix for reporting key sequences like Ctrl+Alt+Del for the USB keyboard emulation
 Shared Clipboard/X11: support for BMP-format images, contributed by François Revol
 Windows hosts: don’t cause massive DPC latency (only on certain hosts; still needs improving; bug #6242)
 Windows hosts: consider symlinks when retrieving volume information (bug #11962)
 Windows hosts: fixed an issue with USB2 devices being inaccessible when plugged into
USB 3.0 ports
 Windows Additions: fixed misbehavior with guest display power management (WDDM
driver only; bug #11170)
 Windows Additions: fixed memory leak caused by WTSQuerySessionInformation() on Windows 2000 guests (bug #12072)
 Linux Additions: fixed udev detection in the init script with Linux 3.x kernels
 Windows guests: ability to track guest user idle times through the newly introduced event
IGuestUserStateChangedEvent(

Download : http://download.virtualbox.org/virtualbox/4.3.0_RC1/

http://www.virtualbox.org/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
VirtualBox 4.3.0 r89960 erschienen
« Antwort #100 am: 15 Oktober, 2013, 17:00 »

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
VirtualBox 4.3.2
« Antwort #101 am: 01 November, 2013, 20:46 »
Whats new:

This is a maintenance release. The following items were fixed and/or added:

    VMM: fixed restoring of the auxiliary TSC MSR in VT-x that caused host BSODs on Windows 8.1 hosts and unpredictable behavior on other hosts (bug #12237)
    VMM: provide fake values for a couple of MSRs to make more guests happy on certain hosts
    VMM: fixed detection of VT-x on certain machines where the BIOS would not set the VMX LOCK feature bit, which affected the VM settings in the GUI
    VMM: fixed TPR threshold which caused BSODs on Windows XP guests that use the I/O APIC (VT-x only; bug #12227)
    VMM: fixed PATM saved state incompatibility for software virtualized VMs (bug #12222)
    VMM: don't fail if AMD-V isn't available if the VM is configured to use software virtualization
    GUI: fixed guest resize breakage on visual representation mode change (when switching from normal to fullscreen etc)
    GUI: make sure the guest screen is resized after restoring a VM from a saved state if the host screen size changed
    GUI: disabled SCROLL LED sync from HID LEDs synchronization (Mac OS X hosts only)
    Webcam passthrough improvements including GUI support (see the manual for more information)
    Guest Control: implemented more IGuestSession methods
    Guest Control: added support for deleting and renaming guest files + directories in VBoxManage
    Guest Control: various bugfixes
    API: incorrect handling of hardware UUID default value, resulting in an all zero DMI/SMBIOS UUID, which leads to Windows requesting re-activation (4.3 regression; bug #12244)
    3D support: fixed crash on shutdown if 2D video acceleration is enabled (Mac OS X hosts only)
    3D support: miscellaneous fixes
    Storage: fixed detection of CD/DVD media when switching from an empty to a host drive with passthrough enabled
    Storage: fixed hang of the VM process when the disk is full under certain circumstances
    NAT: listen for changes of NAT Network setting at runtime
    NAT: NAT Network DHCP server now saves leases to a persistent storage
    Main: monitor changes in host DNS configuration
    Mac OS X host: reworked a mechanism of adding a VM desktop alias from the VM selector
    Mac OS X installer: remove old kernel extensions during upgrade (bug #12258)
    Linux Additions: correctly set umask before installing (bug #12166)
    X11 Additions/3D: fix freezes starting 3D desktop (bug #11503, thank you Sam Spilsbury)
    X11 Additions/3D: fix depth buffer support (bug #11905)
    X11 Additions/3D: fix Age Of Empires 3 rendering (bug #11331)
    Windows Additions/3D: fix Google Earth plugin rendering
    Windows Additions/WDDM: autoresize fixes

http://www.virtualbox.org/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
VirtualBox 4.2.20
« Antwort #102 am: 29 November, 2013, 19:00 »
Whats new: >>

This is a maintenance release. The following items were fixed and/or added:
 GUI: always report recommended resolutions for all monitors (not always done since
4.2.12)
 GUI: make sure the assigned license and description are attached to the exported appliance
 GUI: the OS X hot corners were not accessible while a VirtualBox VM is running (Mac OS
X hosts only; bug #4139)
 NAT: don’t run into an infinite loop in case the host cannot access any DNS server (4.3.0
regression; bug #12300)
 NAT: don’t re-connect the cable if the DNS information changes and the cable was disconnected before (4.3.0 regression; bug #12225)
 Main: properly save the passthrough flag for DVD drives without an attached medium
 Keyboard: fixed a VM crash if a VM was resumed from a saved state where at least one key
was pressed (bug #11289)
 2D Video acceleration: fix crashes on presentation mode switches (bug #9194)
 Storage: fixed errors with snapshots when using QCOW or QED disk images (bug #12144)
 Storage: fix for newer Linux kernels not detecting a hard disk as SSD when using the IDE
or SATA controller (bug #12025)
 Storage: fixed detection of CD/DVD media when switching from an empty to a host drive
with passthrough enabled
 Snapshots: fixed a bug which could result in lost medium attachments (4.2.18 regression,
bug #11750)
 Shared Clipboard: fixed potential SEGFAULT when working with UTF8 and UTF16 content
(Mac OS X hosts only)
 OVF: fixed import logic for OVF appliances containing multiple VMs
 Extpack Installer: make it work if the file is located in a folder with special characters
 SDK: extended the functionality coverage for the C bindings
 API: block the removal of the current snapshot if it has child snapshots (only relevant for
VMs without snapshottable hard disks, their presence always prevented removal), which
resulted in VM config corruption
 API: mark VM configs with snapshots but without current snapshot as inaccessible, as this
combination is nonsense
 API: fixed information for some automatically generated events (only with XPCOM, Windows host was not affected), which caused errors when getting some of the attributes over
the webservice (bug #12379)
 Mac OS X hosts: support for Mac OS X 10.9 (Mavericks)
 Mac OS X hosts: properly sign the kernel extensions for Mavericks hosts (bug #12256)
 Mac OS X hosts: use a launchd script instead of the deprecated StartupItem mechanism
(bug #8940)
 Mac OS X hosts: fixed a bug where the VirtualBox dock icon was not properly removed from
the dock after a VM terminated preventing Mavericks hosts from shutting (bug #12241)
 Linux Additions: Linux 3.13 compile fix (bug #12358)
 Linux Additions: Linux 3.12 compile fix (bug #12083)
 Linux Additions: Linux 3.11 fix for shared folders (bugs #11946, #12128)
 Linux Additions: compile fix for SLES11 SP3
 Linux Additions: correctly set umask before installing (bug #12166)
 Linux Additions: build the vboxvideo kernel module correctly on OL/RHEL 6.1 guests (bug
#11996)
 Linux Additions: make 3D work on Slackware 14.1 (bug #12320 comments 3 and 4)
 Windows Additions: fixed memory leak caused by WTSQuerySessionInformation() on Windows 2000 guests (bug #12072)
 Windows Additions: multimonitor resize fixes
 X11 Additions/3D: fix freezes starting 3D desktop (bug #11503, thank you Sam Spilsbury)
 Guest additions/3D: fix an occasional dead-lock (bug #12319)

Download : http://download.virtualbox.org/virtualbox/4.2.20/

http://www.virtualbox.org/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
VirtualBox 4.3.4 r91017
« Antwort #103 am: 29 November, 2013, 20:00 »
Whats new: >>

VMM: fix for a bug in the Local APIC emulation causing a BSOD when booting certain
guests (4.3.0 regression)
VMM: fixed loading of saved states if VT-x/AMD-V was disabled (4.3.2 regression)
VMM: fixed single-stepping inside the guest for certain instructions (VT-x only)
VMM: fixed a performance issue involving APIC accesses after rebooting a VM (4.3.0 re-gression; VT-x only)
VMM: fixed TPR patching to be enabled for 32-bit guests even when the chosen guest type is 64-bit (4.3.0 regression; AMD-V only)
VMM: fixed occassional VINF_EM_TRIPLE_FAULT errors on hosts without the unrestricted guest execution feature
GUI: don’t bother the user with the BPP warning if no Guest Additions are installed
GUI: fixed machine-window paint artifacts on VM reboot / guest-screen resize
GUI: make sure the assigned license and description are attached to the exported appliance
GUI: fixed bugs in close VM action restrictions handling
GUI: fixed incorrect wizards text colors for some unusual look and feel styles
GUI: should restore seamless mode as soon as possible after VM reboot or shutdown
GUI: fixes for medium enumeration
Host-only Networking: fixed creating of host-only network interfaces (4.3.0 regression)
NAT: don’t run into an infinite loop in case the host cannot access any DNS server (4.3.0 regression)
NAT: don’t re-connect the cable if the DNS information changes and the cable was disconnected before (4.3.0 regression)
NAT: fixed several issues with automatically starting / terminating of NAT networks on VM start / stop and configuration changes VBoxNetDHCP: don’t block prevent VBoxSVC from terminating
2D Video acceleration: fix crashes on presentation mode switches
BusLogic: allow to run VMs with more than one BusLogic SCSI controller enabled
Keyboard: fixed a VM crash if a VM was resumed from a saved state where at least one key was pressed
VBoxSVC: fixed a heap corruption under certain conditions (4.3.0 regression)
VBoxSVC: fixed a race leading to a hang during initialization
OVF: fixed import logic for OVF appliances containing multiple VMs
OVF: improved logic for finding an appropriate image format during OVF import
API: block the removal of the current snapshot if it has child snapshots (only relevant for VMs without snapshottable hard disks, their presence always prevented removal), which resulted in VM config corruption
API: mark VM configs with snapshots but without current snapshot as inaccessible, as this combination is nonsense
API: fixed information for some automatically generated events (only with XPCOM, Windows host was not affected), which caused errors when getting some of the attributes over the webservice
SDK: extended the functionality coverage for the C bindings
Guest Control: various bugfixes and improved VBoxManage help
Windows hosts: another attempt to fix the massive DPC latency
Windows host installer: make registering file extensions optional, contributed by Tal Aloni
Guest Additions/3D: fixed an occasional dead-lock
Windows Additions/3D: fixed possible memory leaking
Windows Additions/XPDM: use separate tables containing valid video modes for each virtual monitor
Windows Additions: fixed automatic logins for Vista and newer Windows guests

Download :

http://download.virtualbox.org/virtualbox/4.3.4/VirtualBox-4.3.4-91017-Win.exe

http://download.virtualbox.org/virtualbox/4.3.4/VBoxGuestAdditions_4.3.4.iso

http://www.virtualbox.org/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
VirtualBox 4.3.6-91406
« Antwort #104 am: 18 Dezember, 2013, 21:45 »
This is a maintenance release. The following items were fixed and/or added:

    VMM: fixed a Guru Meditation VINF_EM_TRIPLE_FAULT caused by VMCB caching with nested paging on certain AMD CPUs (bug #12451)
    VMM: fixed a Guru Meditation VERR_VMX_UNEXPECTED_INTERRUPTION_EXIT_TYPE while intercepting debug exceptions (VT-x only; bug #12410)
    VMM: fixed a Guru Meditation VERR_SVM_UNEXPECTED_EXIT while intercepting debug register accesses (AMD-V only; bug #12481)
    VMM: fixed a VERR_SSM_STRUCTURE_MAGIC error when trying to load a saved state made with VBox 4.3.4 when VT-x/AMD-V is disabled. Unfortunately, VBox 4.3.4 produced broken saved states for this configuration so you have to discard these states (bug #12414)
    VMM: added a few more MSRs to the whitelist required by certain guests (bug #12245)
    GUI: fixed deleting of inaccessible VMs (4.3 regression, bug #12205)
    GUI: fixed warnings in VM settings / number of guest processors (bug #12480)
    Main: don't automatically enable 64-bit guests on 64-bit hosts if VT-x/AMD-V is not available (bug #12424)
    Main: always expose the DMI memory information to Windows 2012 guests (bug #12017)
    Main: fixed occasional crashes on guest display resolution change (bug #7063)
    Main: fixed reporting back temporary name when calling IGuestSession::DirectoryCreateTemp() (bug #12498)
    API: fix for a hang when launching a GUI VM through the API, which crashes due to GUI unavailability
    Storage: fix for BLKCACHE_IOERR runtime errors under rare circumstances (bug #11030)
    Network: allow to start more than 5 PCNet instances (bug #12426)
    E1000: if the cable was disconnected before the guest initialized the device, the link status was not properly set to 'down' after the initialization completed despite the fact that there was no connection
    3D support: fixed offset of guest 3D image elements (Mac OS X Retina hosts only; bug #11021)
    Solaris hosts: fixed accessing the host driver from non-global zones (4.3 regression, bug #12271)

Download :

http://download.virtualbox.org/virtualbox/4.3.6/VirtualBox-4.3.6-91406-Win.exe

http://download.virtualbox.org/virtualbox/4.3.6/Oracle_VM_VirtualBox_Extension_Pack-4.3.6-91406.vbox-extpack

http://www.virtualbox.org/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )